Search found 37 matches
- Mon Mar 14, 2016 7:53 pm
- Forum: 2016 San Juan 21 North American Championship - July 7-10, Lake Newell, Alberta
- Topic: Time to Register!
- Replies: 5
- Views: 48516
Re: Time to Register!
The Blue Pearl is Registered! See you all in July.
- Tue Feb 23, 2016 2:57 pm
- Forum: SJ21 General Forum
- Topic: Do we have to use Randy Blair's fairing, or can we make our?
- Replies: 5
- Views: 13324
Re: Do we have to use Randy Blair's fairing, or can we make
Steve, the reason the Blair fairing is the only legal one is because it's the only one that has been submitted for approval. Obviously any new design would need to get some sort of approval, but If you maintained the basic concept of the Blair fairing it would not be difficult to get it approved.
- Tue Feb 16, 2016 11:38 pm
- Forum: SJ21 General Forum
- Topic: Do we have to use Randy Blair's fairing, or can we make our?
- Replies: 5
- Views: 13324
Re: Do we have to use Randy Blair's fairing, or can we make
Hi Steve, there is nothing really special about the Blair keel fairing, but it works very reliably. As far as the rules go you can do pretty much whatever you want down there assuming you leave the aluminum retainer strips basically intact or don't add anything that fairs the strips away. I worked o...
- Sun Jun 01, 2014 1:50 pm
- Forum: 2014 San Juan 21 North American Championship - June, Oak Harbor, WA
- Topic: Get Registered!
- Replies: 8
- Views: 65008
Re: Get Registered!
Looking forward to seeing everyone again. For those who have not sailed out of Oak Harbor before, it is a great venue and should have good sailing conditions. The only trick can be getting to the race course. Depending on where they set the course it can be up to five miles from the marina and gener...
- Thu May 24, 2012 4:49 pm
- Forum: SJ21 General Forum
- Topic: Boat bottem leaks
- Replies: 9
- Views: 22711
Re: Boat bottem leaks
Most of the boats I've seen don't have a drain plug in the transom. If you are getting enough water in your boat to need a drain, you have serious problems.
- Thu May 24, 2012 1:19 am
- Forum: SJ21 General Forum
- Topic: Thanks for coming! 2012 Seattle NOOD.
- Replies: 2
- Views: 7694
Re: Thanks for coming! 2012 Seattle NOOD.
Thanks Christian. That was a really fun time. Good write-up. I promise more MT guys next year.
Bob
Bob
- Mon Mar 26, 2012 2:23 pm
- Forum: SJ21 General Forum
- Topic: San Juan Logo Type Font
- Replies: 3
- Views: 9215
Re: San Juan Logo Type Font
I think thats a custom font. I can send you the .eps files of the logos if you need to do some graphics.
Bob
Bob
- Sun Feb 05, 2012 3:01 pm
- Forum: Rigging Room
- Topic: Aluminum Bulkheads
- Replies: 6
- Views: 19305
Re: Aluminum Bulkheads
Your boat must have been built on a Tuesday, so the chock position and deck layup is probably totally different than mine. Clark Boats aren't known for consistancy. I'm from Montana so all of our butter is frozen solid this time of year, thats why we need tuff knives ![Wink ;)](./images/smilies/icon_e_wink.gif)
![Wink ;)](./images/smilies/icon_e_wink.gif)
- Fri Feb 03, 2012 12:16 am
- Forum: Rigging Room
- Topic: Aluminum Bulkheads
- Replies: 6
- Views: 19305
Re: Aluminum Bulkheads
You could just move the chocks, but I'm not sure thats really necessary. In my experience, cutting through the glass to expose the bolts and nuts on the SJ is pretty trivial. You could probably cut through the glass with a butter knife and expose the nut sufficiently to tighten it back up. I'm prett...
- Thu Feb 02, 2012 2:00 am
- Forum: SJ21 General Forum
- Topic: 2012 Seattle NOOD is better than St. Pete
- Replies: 22
- Views: 42530
Re: 2012 Seattle NOOD is better than St. Pete
Montana will be making a showing again. Let the Pearl v Frog challenge resume! ![Smile :)](./images/smilies/icon_e_smile.gif)
![Smile :)](./images/smilies/icon_e_smile.gif)